2001 Harley Davidson FLSTC - FLSTCI Heritage Classic "throttle problems" Questions

I let off the throttle and Theres a clunking, metal on metal? If I let off the Throttle there's a lag then a clunk almost sounds like metal on metal. Compensator is fine, nut is tight. Just had Cams ...

...cleaner how to stop this problem just repoaced the cam chin tensioners now oilcoming through the throttle body You may have the oil level too high and if you did not get the oil pump properly ...

have a 03 heritage FLSTCI when coming to a stop have to roll throttle or bike will die.will start up again no problem and the speedo/tach combo doesn't work Sounds like bad fuel, but could be deeper, ...

...The biggest complaint is that they need to have the carb rejetted because of a "flat spot" in the throttle response at about 55-65 mph. The problem is not their carb jetting. It is the lack of ...

...throttle cables) and have no problems with it, and it doesn't do as yours does, but acts smoothly like a cable system. My first suggestion is to take the twist grip off (you have to remove the master ...

...it was pretty dam close to bone dry you think this could be my problem and and maybe why I had the throttle stick on me once when riding??? shouldnt of made throttle stick try loubing throttle cable ...

I own a honda cb trigger bike. I m facing a problem of loss of engine compression after releasing throttle. After releasing throttle engine rpm didn't go down as quickly as earlier. It took some time ...

On a 09 roadking, throttle not working, help Simple solution: One of the two throttle cables has broken. Replace both throttle cables, and your problem will be solved. (Throttle cables on the Roadking

throttle sticking the throttle is sticking when you give it gas Make sure the throttle stop(the little star wheel under the right handlebar control) isn't tightened against the throttle. Also lube

loss of throttle 2008 flhx Fly by wire throttle. All electronic. Clean the sensor in the throttle body...it fixed my problem. If that doesn't fix it then the only thing I can think of is the servos in