1983 Suzuki Tempter GR 650 "stater bolts" Questions

I need to know where the stater is, and how to change it myself on my 1983 gr650 tempter Your stator is bolted into the left engine cover , You will need a stator and a gasket. Simply drain your oil ...

torque specs for the stater bolt on a 1988 ex500 Hi, Try this site page; http://raskcycle.com/techtip/webdoc14.html

...bolts hello. those are the only fasteners that hold the starter into place. however. on the other side of the starter there is a sealing o-ring. after time this o-ring likes to hold the stater in its ...

...to reduce any chance of shorting tjings and doing more damage to things. After that you should be able to remove to two bolts holding the stater and then remove the wire also. Replace in the same ...

how do u take a stater relay off a vl 125 Follow the live lead from the battery it will go to the starter solenoid,disconnect it from the solenoid by undoing the bolt that holds it on then undo the ...

...stater in a 2003 dyna night train Disconnect the battery. Remove the primary cover and remove the starter jackshaft. From the right side of the bike, remove the exhaust system and anything else that ...

stater gear then remove the 2 bolts holding the starter motor on then you will find 6 or so bolts holding the inner primary case on remove these and the inner primary case will come free with a little

...bolts and one wire....be careful when undoing the wire to the stater, not to turn the whole bolt sticking out of the starter....let us know what you find...pictures are all ways helpful! ...

suzuki 400f turn the key on and push stater button and it just clicks Low charged battery ,Bad battery, bad ground or loose terminal bolt

stater,do i have to torque the lock-nut? how many lbs. does it take.where can I acquire a reapair manual Do not torque your starter with a torque ratchet,You will break bolts,,,,It requires inch lbs.,