We've got a virago 535 and want to find out how to take off the starter motor. I've already taken off 2 bolts and can't get it off, is there any other screws or bolts
Hello.
those are the only fasteners that hold the starter into place. however. on the other side of the starter there is a sealing o-ring. after time this o-ring likes to hold the stater in its place. so with so very light prying the starter should slip out. hope this helps.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Any thing can be done, but. You would need a welder who knows their materials, types of metals. The biggest problem I can forsee is a distortin of the metal then you need a machine shop with a surface grinder to true it up again. I personally think it will be more trouble than it's worth
Check to make sure your getting gas by pulling off the hose, if no gas comes out your petcock is clogged. If this is the case blow air up into the hose, and if gas comes out now your tank has to be cleaned out.
×