1989 kawasaki GPX 250 R "tappit" Questions

Im adjusting the tappits on the motor I havent started yet and I dont have a manual. So I would like to know: a What type of adjusters are they. b What is the gap size to adjust to. c And is there any

HAVE CHANGED HLA'S AND THE TAPPITS, AND USED VARIOUS OILS. THE OILS STOP THE TICKING FOR ABOUT 80-15- MILES AND THEN IT STARTS AGAIN. AT THE SAME TIME THE CLUTCH STARTS SLIPPING. ANY IDEAS PLEASE. if ...

...running is so minimised.wht will b this problem? Replace your timing chain, mobil,& adjust tappit and keep a check on the mobil levels.. if it decreases top it up. Back firing is caused due ...

I have a yamaha ybr 125 2010 fual injection wont rev past 6000 rpm i no timung has to be done and tappits i dont thi k that the problem i have no clue about fual injection at all the bike only do 40 ...

...head off take off the 2 caps at the top of the cylinder head . there you should see the top of the tappit and an ajustment bolt.get a feeler gauge you then need 2 open a vaulve by turning the cam ...

geely moped my daughter has a gelly 50 cc and the other day dhe was riding along when it started juddering then after a week of this she was riding along when it just cut out so she left it for a 5 ...

slight knocking is it more likely to be tappits or bearings, done 33,000 Go to premium gas if you are not already using it. The problem may just go away after the first tank. This would be the case if

Tzr with aprilla 50 engine?? Got a 50 aprilla engine in tzr n electric start but when I go to turn it on nothin starts just the digetal mph clock..sum 1 said clean the jets or the tappits no clue were

...fz1n (57) and can seem to get the exup valve to operate correctly? sticky valve stens,inccorect tappit ajustment,valve timing out.valve springs ...

setting valve clearances 04 V11 6 yrs ago I brought my 1100i sport I learned how to set the tappits myself 4yrs ago I brought a VTR1000 and never needed to set anything 2yrs ago I went back to MG... ...