NorStar BCM-M7324 Corded Phone (nt8b42ac35) "showing line 1" Questions

...line 1 = 001 6.- press the show key (top right arrow) 7.- The display should say Trunk/line data 8.- Press "show"(top right arrow) - display should read "trunk type" 9.- Press the next key (bottom ...

showing a line in use. The beep beep happens when the call is coming back to you but I cannot retrieve the call as the line is not showing as in use. Help! That might mean that the line(s) is(are) not

showing in use when no one is on the phone. We want those lines back. Thanks! 1. You can name the lines, for example (Line 1, Line 2) - or - (5551234, 5551235). You can also name the sets (phones), so

...1-Line FC2548 1-Line FF908 900 MHz 1-Line FM144 FM2552 1-Line FM2552/FM2000 FM2552PX FM2560 FM2572 FM4484WW 1-Line FM891B 1-Line FS800 FS900 1-Line FT-412 FT365 GH 3034BL GH 3210 2.4 GHz GH5810 GHz ...

...showing line 1 as line 4, line 2 as line 5 etc... Line 6 shows as "make calls first", and the page button  always dials a number previously dialed earlier on in the day. How can I correct this. ...

...showing the correct line voltage on line 1. The phone believes line 1 is dead. Use a regular phone and check line one for dial tone. If as the other reviewer is correct, and you are using DSL on line ...

... type number and the name will show up Press line 6, line access will appear Press line 7 twice and change will appear Enter the name then press line 1 End session and save worked for me, hope it ...

...Line 1 shows that it is in use by an internal user. When trying to hang up or release that line it doesn't. We are not able to receive incoming calls on that line now. the easist way to reset that is ...

...Line 1+2" to "Line 2", and configuring both lines to use the Personal Outgoing Announcement. I have it set to Answer Line 1 - ON (but have tried either line 1 -2-or both on). The unit still wants to ...

...showing incoming call information on line 1. I used to be able to see who was calling on line 1. Suddenly, it no longer shows and there is nothing on the call log. It worked then stopped. All other ...