...keep the tension on the blade tight. After a short period of use it loosens up and won't stay on the bar. Check threads on tension bolt may be worn or adjuster threads that bolt screws into may b ...
tight but so long as the chain runs freely, which you can check by rotating the chain by hand, then it w should run OK. Don't forget, always keep the chain perfectly sharp as a blunt chain causes wear
I can't keep the chain tight on the chainsaw After adjusting make sure to tighten the bar bolts(nuts). If they're missing, replace them and tighten securely after adjusting the chain tension.
can not keep chain tight Replace tension unit.
The chain keeps coming off and we just got it today. Sounds like you do not have the chain tight enough. Read the book if it came with one. Good luck
...keep it running for a couple minutes until the partial blockage in the carburater clears. Joe Thanks for choosing Fixya! Check there are no kinks in fuel line. Make sure that the air filter isn't ...
...chainsaw You need to tighten the chain. Loosen the nuts that hold the blade on just a little, then look on the inside of the blade. You will see a screw to tighten the blade. The chain should not be ...
Question about Stihl Garden
...keep consistant tension. 1st it goes really tight then after retension it goes really slack. any ideas? Most chain tention issues are due to inadiqate oil to the bar and chain, or the wrong type of ...
flywheel breaking Jonsered keeps breaking the key way off the flywheel. It's bolted down tight. What's happening? If you aare sure the securing nut is tight, then it has to be a problem with the taper
16" chain, 16" bar it 16" chain, 16" bar it is the right chain for the bar. chain wont keep tension when started You're not tightening the nut tight enough.
131 questions posted
Usually answered in minutes!
300 Questions
155 Questions
148 Questions
