the remote you will notice the input change from Composite 1, Component 1, S-Video. V5 will show composite 2 and component 2. Using the side panel allows youto scan all inputs in case you are not sure
composite input, then the problem is circuitry and will have to te repaired. If you haven't tested the composite [RCA] input, now is a good time. If the composite input looks normal, then you know the
Question about Panasonic Televison & Video
...and white lines There is either no input signal or the wrong input signal (mixed up audio and video or component/composite ). You may also be trying to view on an incorrect input
...composite or signal and color. Other than using CH3 from the cable box, this is the poorest performer in regards to signal quality. Additionally, the signal only has 480 lines of resolution and your ...
...input ( RCA phono x 3 ) - rear 2 x composite video input ( RCA phono ) - rear Try using the on screen menu to bring up a choice over which input to show. Switch it to the one you have connected to
composite cables..? that means you have some kind of cable box ? if you want to get HD channels you have to use a HD box that is supplied by the cable company.. the HD cable box then has to connect to
Question about Panasonic Televison & Video
input wires from receiver to panasonic TC-P50S2. HAVE audio no video feed on tv Dvd player to receiver to tv Usually DVD players have either composite or component video out (unless you are using HDMI
Composite' perhaps also 'HDMI' and 'Component.' If you are set to the wrong input, the TV will give that message. You didn't mention where your signal originates (cable, satellite receiver, etc.) so I
...input from the cable box is causing the issue? I've tried everything I can think of, including setting back to "Shipping" mode, normalizing during Picture adjustments, changing the component/RGB In ...
72 questions posted
Usually answered in minutes!
92 Questions
45 Questions
42 Questions
31 Questions
27 Questions