Tried to use my TV as a computer monitor. When tries to boot up, will go to "No Signal". All hooked up correct. Is ther something I need to do tobe able to use the monitor with my computer. I have a Dell Desk Top Computer.
I can't find my remote instructions - can I get a copy of instructions on what all the buttons mean. I only have it hooked to a VCR/DVD player (no cable or satellite). I want the monitor (poloroid) to allow the remote for the DVD player to be the one I use. I DID have it working this way then I accidentally hit a wrong button and now I can't get it to do anything. I need to know how to set the remote again so I can use the DVD remote to run the thing. HELP
TV is connected to a satellite receiver, The measaged on the screen says no signal. The choice of input is cable. What do I try next?
It sounds very much as if you have the wrong source selected.
Go to the main setup menu and look through the functions there.
You should find a choice of inputs such as 'Cable' 'Antenna' 'Composite' perhaps also 'HDMI' and 'Component.'
If you are set to the wrong input, the TV will give that message.
You didn't mention where your signal originates (cable, satellite receiver, etc.) so I cannot tell you which setting you need to select.
813 views
Usually answered in minutes!
×