Remington Electric Pole Saw "chain oil" Questions

...Chain Oil" will do fine. Do not use motor oil you use in your car engine as it will not properly lube the chain and will result in quicker dulling and early demise of the chain. You can get the "Bar ...

...chain oil. It dribbles onto the chain as the saw runs, lubricating the where the chain slides over the slot in the edge of the bar. Without this oil the chain & bar will overheat pretty quickly, ...

...chain oil for chain saws will work. The cheaper the better just make sure you keep the chain oiled up. if you can touch the chain and oil oil does'nt get on you you not using enoght and put oil right ...

...oil on the chain. An auto oiler model works without you doing anything, the pump is run by the engine. A manual model, you pump the oiler The Chain saw has internal oil channels or holes to apply the ...

...chain oil. this is found at most chain and ag stores like wally world and tractor supply, atwoods etc. it's labled as bar and chain oil also 30 wt non detergent oil is good. the chain on any chainsaw ...

...chain saw oil is available. If you use anything but chain saw blade oil, make sure that it is a light oil, both in viscosity and in colour because it is a total loss system and dark or dirty oil can ...

oil? Use CHAIN oil. Any oil will do but chain oil is thicker and sticky and will stay on the chain much longer. The price is much the same. Stephen. Bar and Chain oil, available at hardware stores and

...chain oil flow rate the oil has stopped oiling the chain to test if your oiler is functional remove bar and chain and start unit. if it drips oil with bar and chain off then clean the oil hole in the ...

...chain oil in RM1015P what chain lubrication oil? Hello, The chain lubrication oil is called bar and chain oil. It is specially formulated to cling to the bar and chain to ensure maximum lubrication. ...

...chain oil instead of the 30W as the book says. Any idea? Remove the bar and chain and clean the side of the engine where the bar fits. There is an oil port there that should ooze oil out when the ...