Hayward Navigator Pool Cleaner "pump making high" Questions

Ad

pump basket. Could also be a high draft from being to close to a high wall and this will cause a down draft when cool night air gives more ristense than it can get over. hard to say without more info.

Ad

Question about Dream Maker Spas Pool & Spa

1 Answer

...They will leak more on high speed and if you have a cir pump that runs the filter and an additional pump for high speed jet action it would make sense why it is leaking more while you are using

Ad

...making a very loud rattling noise. I've been through a long list of troubleshooting tips and it seems that flow is the issue. If I up the variable speed pump to 2300 rpm or more, the heater ...

hot water. Check to see that you have sufficient flow, clean the filter, and make sure the filter pump is running. If everything else is running properly, you may have to replace the high limit sensor

...Had several repair men look at it and they say they are lost for solutions? HL should stand for high limit check temp sensor also make sure the recirculation pump is working and clean ...

Question about Harmsco Pool & Spa

1 Answer

...making a loud noise like screeching sound. It still is working but the noise is terrible. The sound you are hearing is most likely rust forming on the inside of the motor. It tends to happen when a ...

I have a orca bay hot tub just replaced upper display now says hl replace the High limits or make sure recirculation pump is working

Question about Pentair Pool & Spa

2 Answers

high pressure, and heater noise I have a pacfab minimax 100 heater. It makes loud banging noises when pump shuts off and waterflow stops. The heater's outlet water plumbing fitting is failing as if ...

Question about Pentair Pool & Spa

1 Answer

...high limit is open this is due several factors like slow water .pump on low speed or dirty filter, also hard water, or assembly valve not working properly so make sure the filter is clean check the ...

pump works on low speed but not in high speed sounds like bad switch or 2 speed relay I think there should be maintenance of your pump. 1. Clean 2. Check the machine controller (pcb main board) change

Not finding what you are looking for?
Hayward Navigator Pool Cleaner Logo

250 questions posted

Ask a Question

Usually answered in minutes!

Top Hayward Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Hayward Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...