Husqvarna Lawn Tractor 48" Deck, 23 Hp, Model# Yth2348 "bypass brake clutch" Questions

...brake/clutch pedal. I bypassed the seat swith and replaced the interlock switch. Any ideas? I bypassed the seat switch & replaced the interlock switch replace the switch on the brake/clutch it is ...

brake switch to check, but have no idea where it is. Any assistance is appreciated. the seat switch is the problem. the switch itself could be bad, but usually theproblem is that the connector is just

...clutch/brake switch, and the clutch switch. That way it won't start if the clutch isn't depessed (brake on) and the mower deck turned off. You can test for voltage on the s terminal (start) on your ...

...clutch/brake or engage the mower blades. I have bypassed the under seat swith, and I have also bypassed the clutch/brake switch. The mower will not stall out untill I engage the mower. Any ideas on ...

murray 12hp engine shutting off after clutch in released check the safety switch on the brake/clutch pedal bypass it with a paper clip to test it

...brake switch and it starts, but when I try to engage my mower deck the engine dies. I bypassed the seat switch, but this did not help. Any suggestions? there is also a clutch switch pto switch try ...

...the brake pedal to return to the run position the engine shuts off. I have bypassed the seat switch and it the engine will still shut off. there's another safety switch on the clutch/brake ...

engage blade mower dies 42e707 2631e1 bypass the safety switches to test them one is bad start with the one on the seat then the one on the brake/clutch pedal

..., runs good . Clutch/brake switch good . Seat switch is bypassed . Most likely something is jamming a blade. Another possibility is the reversing safety switch is stuck which cuts the engine

...you have a hydrostatic trans you can put trans in bypass and push to see if brake is stuck. Remove drive belt at engine or at trans and try the cluch, if motor stays running there is a trans