Question about Xerox Phaser Office Equipment & Supplies
...bad out of the box. Even if you are only printing black, the machine will purge ink slowly through the print head of each color to avoid a clog and other costly repair. Your solution is to add yellow ...
Question about Xerox Phaser Office Equipment & Supplies
...yellow print blocks and there is plenty. What it essentially boils down to is that you're not printing enough color. The blocks are melted into a holding bin and will discolor over time. To correct ...
yellow, and magenta but little or no cyan then your printhead is bad. Whith these machines cyan is the first color to have poblems starting with weak or missing jets. You can try to run the "eliminate
...45 6117 xerox 8560 The inkloader has gone bad, the error signifies that the yellow ink is unable to melt, part number 133K27770
bad aftermarket ink in my printer? Any help would be greatly appreciated! In all honesty, I suspect the print head has some bad jets on it. Xerox will not warrany it since there is the presence of non
...yellow is the best of the 4 colors with very few missing some a faded black and very few distorted. The Magenta the lines are mostly missing some distorted and some a faded mix of black. The Cyan ...
...yellow. The problem is most likely a bad Image Unit. Xerox guarantees their supplies to be free from defects as long as their is a life percentage left and will replace it for free. Take it back to ...
...yellow ink and the I received a message that said Printer Error. The error asked that I tune the printer off wait 10 seconds and then turn it back on but when I do this I keep getting the same error. ...
yellow ink buildup in that block. There is a spring on a bracket that you have to slip off to remove and clean the block. If excessivly filled witih ink you may have to use some channel lock pliers to
Question about Xerox Phaser Office Equipment & Supplies
yellow and grey sheet. The cyan sheet darkens towards the bottom in an almost perfect gradation. I have replaced the cyan toner and imaging unit. The problem still exists, and seems very consistent in
51 questions posted
Usually answered in minutes!
436 Questions
284 Questions
262 Questions
152 Questions
147 Questions