Konica Minolta magicolor 4650DN Laser Printer "card initialised" Questions

...is initializing. Also, there is a 'memory full' error when there are too many fonts on the memory card, but this is not something you mentioned. If you can't solve the problem with the above, I ...

hp 5550 card slot not initialised power off/onhold menu button when memory count startsrelease when 3 light lit.select init disk

...away and then will not restart for 5 minutes and then does exactly the same again it is a logic card problem. so pls checked it from printer service

I have a Magicard Rio I keep getting the error message card jam error 02:12 yet there is no card jam if i put a card in the back it ejects it correctly help Any ideas please? Hello Colin, I'm not sure

card sensor (very rare though). Open the lid, remove the dye film. Check that there are no cards jammed near the front of the printer (just before the flipper unit). Try unplugging the printer. Cancel

...working on wide formats, Canons only have two problems, dirt or head failure. Never has he seen a card or any other electronic problem My guess is that the head has failed, even though it doesn't ...

...a: Cannot initalise Flipper. Please clear printer mechanism. Code 18:01 I have pulled out the card I was printing at the time, but don't see anything that may be causing a jam. Hello ...

...let it try to initialise. When it errors and the Red LED is flashing, Download and install the Magicard Support Utility (V3.14). You can get this here; ...

Static Warning light My Magicard Rio Printer has the orange warning light on as soon as the printer is switched on - it stays on. I can no longer print and the pc warns that the printer is off line. I

check cartridges. I do this but still all lights flash on and off. The copy , fax , scan, and photo card flash on and off