Sanyo FOR PLC-XE31 "projector turns turned" Questions

Infocus LP725 projector Hello The projector will not work. I tried to plug it in and turn it on and nothing happens. I took and unplugged all cables except the plug in and tried but no avail. Maybe a ...

turns on, the mainboard is fault Have a nice day! We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, powersupply ... with high quality and competitive

How do you reset the Projector after installing a new lamp? There are two common methods to reset the lamp counter on these projectors: Method 1: - Press the decrease volume button on the remote and ...

...projector lamp no longer turns on, instead the fan runs on high for an infinite time until turned off. As well the Power light flashes green after it is turned on. I have no doubt that the problem ...

projector turns on then shuts off after a few seconds hi, i have a sharp vision projector that was working fine then it just shut off. the power light went from green to red . when you try to turn it ...

projector is the power light blinks red for a little while, no fan turn on or anything. Thanks, Greg To solve this problem, simultaneously press the "Input", "Enter", and "Undo" buttons. While holding

light on my sharp xg-nv4su projector comes on for a few seconds then goes off. how do i reset the lamp timer? To reset the lamp timer you: 1. Turn off the main power button on the back of the ...

...projector never turns on and the shutter closes after 15 seconds. i've tried several times and always the same thing.. the projector after 15 seconds turns off. could you help me with this? thank you ...

Acer P3250 will not acccept password... Acer P3250 projector will not acccept password... both 1234 and the password on the security card I found a solution that worked for me: 1. Turn on the ...

Projector turns off Projector will turn on for two minutes then turn off. Power LED is red flashing. Lamp LED is a solid red. What does this indicate? Hi, It sounds lamp is dead in this projector and ...