Question about Aprilaire Humidifiers
local gas co tech says trane tech should have installed it on supply plenum which one is right you are ok. this way humidity will get to whole house if your supply duct splits off. done this way often
...whole-house humidifier. It fails to add any measurable humidity to the air, and the green LED does not come on during operation. Other than that, everything I've been able to observe seems to be ...
...whole house humidity thru the return air duct. if you turn the knob on the HS if you listen closly you should hear it click indictacting the humidity level as you raise the dail when you go above the ...
honeywell he220a install can i install the he220a on the hot air or the cold air return does it matter thanks for your question, you have to install the bypass humidifier on the supply side of your ...
Honeywell HE260 leaks somewhere I have a Honeywell HE260 humidifier installed in my forced hot air furnace controlled by a Honeywell Humidistat (no model number). The humidistat is installed in the ...
...whole house humidifier. It does everything correctly but does not add enough humidity to the air even with the control turned to max. Water passes through correctly and out of the drain while the ...
house low voltage wires to the humidistat.. nothing happens. As a check , I tried a bench test, and touchd the 2 yellow wires ,with the unit plugged into wall outlet , assuming the fan should turn on.
this is not a problem yet!!!!! I am wondering if this is not a problem yet!!!!! I am wondering if I install your humdifier Model HE 360 A to the return duct, will it preform properly. What I am ...
Question about Honeywell Humidifiers
installing whole house humidifier I recently installed a Honeywell HE360A1027, before I installed it the house was at 16% humidity and 3 days later still 16% I placed the humidy sensor over a register
13 questions posted
Usually answered in minutes!
16 Questions
7 Questions