Question about Toyota Highlander
is rpm suppose to work when the accelerator is not pressed? 3.0l v6 yes when cars running theres rpm
...If you want an educated "guess", (and this is ONLY a GUESS), I would suggest replacement of the RPM sensor on the A/C compressor....HOWEVER, I would NOT guarantee that will cure your problem.
...in the near future. I found a temporary fix is to turn on the car and keep the idle up near 2000 rpm for about a minute (allows engine to circulate oil) and then rev up the engine to about 5000
...noise at acceleration. OK on open highway - just at acceleration? Any thoughts? Could it be low RPM pinking? Try premium gas to check. If that fixes it then you have bad gas, the wrong type of
trying to find appropriate RPM speeds when idling curb idle (in park) appears to be 750 rpm
Engine idling at higher rpm than usual Recently (after changing the transmiision fluid and antifreeze), the engine of toyota highlander 03 started ideling at 15 rpm when the car is stopped while it ...
engine will not rev past 2000 rpm This car is a fly by wire throtal. Tryed a new throtal valve, no difference. It is a limited edt. v6. The car has sat for about 6 months. before that the car ran ...
...in the fuel tank. - Storage battery is in good working condition. - Check the cranking speed. (250 rpm). - wire harness. - Fuel system. - Ignition/injection system. - Cylinder compression. - ...
...fuel trim in the ECM memory are erased,So to restor it the mechanic would of have to high idle the RPM in park or neutral at 1200 RPM and switch on the A/C, for at least one minute, there the idle ...
625 questions posted
Usually answered in minutes!
375 Questions
318 Questions
275 Questions
235 Questions
204 Questions