1996 Toyota Avalon "belt measure" Questions

belt on my 96 avalon! i need a replacement what size is it?? it has a head size of 12mm but i dont know the exact size to get a replacement can someone help?? Your first problem is to extract the bolt

...to test your spark plugs or coils for spark. If you have spark, you should look over your timing belt or timing chain to make sure it is not broken or slipping. If you are not getting spark, you ...

...belt flat , use a ruler and measure it to the mark buy new new belt on that new reading the first step is getting the tension'or to mid range. so the measurement is correct, done this,many time for , ...

Is there a diagram for bypassing the ac compressor pulley and what would the belt length be? Make you own. Just used a piece of rope. Once it has been measured add a inch or inche and half to the rope

...belt routing for 5.7 hemi need to temporarily by pass the air comp you would need to use a Tailors Tape Measure(the cloth type)and go around all the pulleys except whatever you want to bypass.what ...

...belt that skips the a/c compressor thank you To get the measurement use a tape measure and wrap around all the pulleys you want to use. Where end meets will be the size belt you need. Allow for any ...

...measure the length of belt needed to go around all pully's except the compressor. Take the measurement and the old belt to an autofactor's the old belt is important to have because the dimentions of ...

...to an auto parts store like NAPA and they should be able to either match it or order it for you, if you don't have the belt then measure the belt run (pulley to pulley groove) with a piece of

...serpentine belt on my 2007 Chrysler Sebring You will have to take a measurment and buy a shorter belt.. one way is to use a string going around all pullies.. then measure string and buy correct

...belt into any auto parts store and they can measure it for you on a special tool that they have that measures the inside diameter of the belt. The belt is about a size 28, but you should just ask the ...