1994 Toyota Camry "96 2 engine" Questions

...96 camry with a 3.0 v-6 1mz-fe engine. it has three coils which are attach to the left head 2-4-6-cylinder and has three spark plug wires, one from each coil. which spark plug wire goes to which ...

...96 toyota camry 2.2 l, 4 cylinder has 2 converters. front and back. y car has 260,000 miles on it. Do I need to replace both converters or just front or just rear? Thanks, Mike If you are going to ...

Image of 1996 toyota Camry firing order with a distributor cap Firing order on Toyota Camry 96: 3S-FE Engine Firing oder : 1-3-4-2 Distributor rotation: Counterclockwise

2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will

...V-6s are equipped with the 3.0L engine model 3VZ-FE. This motor was used for 2 model years only. Then replaced by a new more powerful 3.0L V-6, model 1MZ-FE all aluminum motor for years

...96 Camry no longer starts, unexpected failure, it cranks but wont start. what could be the problem? fuel injection system? also leaking some oil from oil pump. It Could Be A Number of things 1 Fuel ...

...96 models with cruise control, remove the actuator cover and disconnect the wiring harness. Remove the three bolts and then lift out the cruise control actuator. Remove the bracket from beneath the ...

96 Camry 4cyl. 111,000mi. CATALYTIC CONVERTER(manifold) failing check engine light came on and after diagnostic at Toyota was told that the manifold cat. converter needs replacement and that the front

...96 and every time I turn it on, it just turns off immediately, won't stay on for 2 seconds, there's no check engine lights on or anything. I have no clue what is the problem can anyone help? ...

...2. now where would that be. answer real OBD2 connector (USA cars) is just to right of steering column,at dash edges, TOY cALLS this DLC3 (96 camry) all scan tools with J1850 Bus work here. (older to ...