...brake shoes were replaced in April and a couple of months later there was a grinding sound. The mechanic replaced the shoes again and we still had the problem. He then replaced the drums and it was ...
...hand brake and asking a friend with good hearing to assist you, pull to highest point and release. Ask your friend to listen for clicking sounds from both rear wheel assemblies. That action will have ...
...brake shoes, drums and wheel cylinders changed on my back breaks. I drove it for a day then took it back. the guy said I had to give the new shoes time to wear in. went back said give it till 1000Km. ...
...hand beak problem....Thanks yes thats easy ,just remove the rear brake drums ,clean the lip out from where the drums have worn and then adjust the automatic adjusters with a thin screwdriver till the ...
...hand,, the front brake are disk's and they are self ajusting,,, after doing this work leave the car for a minue or so and stamp on the brake to pump them out if you then need to pump the brakes up ...
Question about Toyota Corolla
wheels only. Can you open the bleeder or the rear line on the master cyl and get fluid to come out by depressing the pedal ? Might be a stuck brake caliper or miss adjusted hand brake. Hope this helps
...hand and listen for the brake shoes to rub against the drum. place a screwdriver in one of the holes that has the star wheel in it as you turn it the wheel clicks against the auto adjuster THIS IS A ...
shoes passed the point of almost metal on metal. Now that being said, it if just driving and slowing down and not applying breaks at all, the rpm as you know go down, which means the transmission
990 questions posted
Usually answered in minutes!
1,231 Questions
1,240 Questions
1,236 Questions
819 Questions
767 Questions
