1989 Toyota Celica Liftback "starter problems" Questions

starter problem on 1991 Toyota Celica GTS I have a 1991 Toyota Celica with the 2.2 and 5 speed transmission starter engages but does not catch for some reason any ideas on what might be the problem? ...

...problems starting for a while now. It would just make a clicking noise when you start it but if you let it sit for a minute or two it would eventually start. Then recently it wouldn't start anymore ...

just replaced the trans on a 1991 toyota Celica. Now the starter doesn't work. Put a new starter in and same problem. It clicks like the solenoid is working but won't turn. Checked the battery and ...

...the clutch down and turn the key to start it and it will not start. It will not even engage the starter. I leave the clutch pushed down and start to turn the key off and on til it will start. I ...

...the car to start My 2000 4Runner has a problem. I put in the key and I get a click. Sounds like a starter problem however if I move the steering wheel slightly to the left or right the car starts. ...

...Can anyone suggest a solution to an issue like this? This sounds like one of two possibilities: - Starter relay/solenoid has a burned contact - Starter itself has a bad winding or bad connection My ...

I have an 1988 Toyota Celica G/T.It hasn't been starting with the key I'm on my 2nd starter.But it does start when I stick a screw driver in the part that stickes out of the starter with another screw

1994 Toyota Celica Starter I know I have to change out the copper solenoid contacts to fix my starter problem...but where is my starter (i'm looking for a diagram), and which tools will I need to ...

39;t start up again. when I turn the key it just makes a spinning sound, Bendix has gone out on the starter. Replace starter. The spinning is the starter but it would not have gone out while "driving"

...GTS with a starting problem. it will not start when you turn the key. the Alt has been replaced, Starter Relay and Ing. Switch but still will not start. The wire to the starter from the relay only ...