2007 Toyota Camry "jack points" Questions

Jacking point for 1990 Toy Camry center of front. how do I jack up the front with a floor jack? Should I jack up the transaxle housing at the motor? or jack each side and put jack stands one at a time

tranny how big a job is it unless you have lift to access the bottom of the car, and a transmission jack,dont attempt it. Taking out any front drive transmission is a BIG pain in the ****! However, it

Can't get my wheel off, despite having lug nuts off and jacked up 2007 Camry Hybrid and have changed a few tires in my day. yet, having the lug nuts completely off, the car jacked up, i can't get my ...

...jack up the rear just in front of the rear tire you are changing. (don't lift off ground completely yet). Using the lug wrench (also called a tire iron) break loose each lug nut. Finish raising the ...

...components you may void warranty --wheel speed sensor is part of your front hub abs assembly jack up and support front wheel [either one because you will be checking both]remove wheel check

...points to a faulty control valve - air in the system will cause this intermittent behavior, but you said the air has been purged out? If not, jack up the whole front end, start the engine, and turn ...

...a 10mm hex drive or 17mm socket to undo. You have two choices after driving the car onto ramps or jacking up and supporting on jack stands so you can safely get under the car. 1 - You can loosen

...jack to give you more room to better access the motor mounts, leave the wheels on. Remove the heavy duty lead attached to the motor/solenoid body and remove the two bolts mounting the motor to the ...

jack. Remove the rear tire or wheel assembly. Use the socket wrench to remove the caliper mounting bolts. Slide the caliper off of the disc rotor and hang it in the wheel well with a small bungee cord

...stucked betwen the wheel and the chassis.Squiking noise may point draging brake,bad bearing,must jack-up and move the wheel.So low on ...