1992 Cadillac Eldorado "trunk pull down" Questions

...trunk pull down assy is not raising. On the pull down is a black little piece of plastic ( part of the switch ), Flip up plastic to see if motor wll raise pull down, then the trunk can be closed ...

...trunk lid pull down fuse location any advise on a trunk lid that does not pull down Try number 13. center of fuse block labeled deck lid. To fix the problem you will need a pull down switch. The ...

...pull down The trunk lid will not pull down. It does not make any noise. I would appreciate any advise & I would like to know where the fuse is located & how to get to it. Thank You check 25A fuse in ...

...will not pull the trunk close anynmore and my "trunk open" indicator will not go off when I drive. well that either indicates the contacts are worn or that the servo motor for the latch needs ...

Trunk "popper" quit working, but "pull down" still works 2002 Cadillac Eldorado - do I need to replace the entire "pull down" motor assembly to regain the "popper" function? can you still open it ...

...trunk pull down feature? if so then maybe mine is disconnected, before i assume the motor is bad attach to the motor pulldown unit there is a electrical plug. check to see if this is plggged in and ...

...trunk lid pull-down switch located? The trunk lid on my son's 1990 Eldo no longer pulls down. I checked out the switch that is on the motor and it works properly. There is a remote switch located ...

...supposed to stick it all out then as u close the trunk it will pull the necessary part only till the trunk cant go any further. HOw can yiu repair a trunk latch,that won;t close the trunk,on a 94 ...

...trunk lid pull down unit . At the red with white trace wire . Check the black wire for good ground . Do you know how to test automotive electrical circuit's with a DVOM - digital volt ohm meter . Do ...

...trunk will latch closed but the motor that used to start the pull down will not start. I tried the reset by pushing the lid latch just like the book says but that did nothing. Go to dealer and ...