1998 Audi A4 "clear brake abs fault light" Questions

...been replaced, the joint may not have an ABS ring fitted on it.[front] At the rear the ABS pick up is fitted on the inside of the brake discs and must be fitted to the new disc when replacing

...clear. Anything related to brakes should be checked out by a garage/mechanic and not ignored. Its probably just an abs sensor failed but its better to be safe than sorry. Sorry for the lecture but I ...

...clear 'fault' until next hard right. Later, occasional metal on metal feel in pedal with ABS Fault activating sometimes. Next, mostly during a hard right, both ABS AND Brake lights would light. I ...

Brake System (ABS) Module in this section. CLEAR the DTCs. REPEAT the self-test. C2769 (ABS with stability assist) Longitudinal Acceleration Sensor Electrical Failure (Sensor Cluster Fault) ABS Module

...brake master cylinder reservoir low to empty of fluid before the light came on what code did you get when you read the abs fault as it may not be fluid related and bleeding the brakes will not clear ...

...clear roads but in snow storms or slippery weather the don't come on? can they mess up without light coming ? The ABS is controlled from the sensors at the wheels . The sensors signal when the wheel ...

...ABS LIGHT COMES ON TO WARN U THAT A ELECTRONIC FAULT HAS OCCURED IN THE ANTILOCK BRAKE SYSTEM, IT DOESN'T HAVE ANYTHING TO DO WITH THE BRAKES BEING WORN, HAVE THE SYSTEM TESTED FOR THE TROUBLE CODES ...

abs warning light is on the brake peddle seems normal so its only very hard until the abs shuts down and it seems like the hydraulic pressure isn't getting to the calipers because you can stand on the

...brake light stays on you must re-bleed the system properly, especially the back brakes. Bring your vehicle to a local autozone to reset the ABS light or check for an ABS fault code and post it on ...

brake light on. code c1040. I changed rear abs sens. any thoughts why still on? Have you had the fault reset? Some faults don't clear themselves when changing parts, they require resetting afterwards.