timing notch mark (1) to oil pump mark. Align cam pulley(L+R) marks(3) to cylinder head marks The cam belt has 3 marks, 2 lines and one mark that is actually a row of dots. Align the dots to the crank
...timing marks align with the timing marks on the oil pump and front plate. When the timing marks are align, no pistons are at TDC for the compression stroke. Valve damage may result if the sprockets ...
...list. make sure the timing marking are the same as you check at the first time. before you start the engine, make sure you turn the engine 2 or 3 round and make sure no part are hitting. good
...timing marks with the pointer dots on the back covers. Verify that the pointer on the crankshaft aligns with the mark on the lower timing cover. NOTE When the timing marks are aligned, the No. 2 ...
...I find tdc on #2 cylinder when timing belt breaks Timng belt installation involves the #1 cylinder, not the #2 cylinder. Below is the picture of the timing marks for the 4 cylinder and the 6
...timing marks on the sprockets, belt etc. It says that the grove on the crankshaft sprocket should align with the cast in mark on the left side, front of the oil pump. At the same time the camshaft ...
eerything works wont start think the firing order is wrong on the plug wires how do i correct it??? why are they wrong???? you been taking them off or what??? the firing order is 1-3-4-2,,,,,next time
Question about Isuzu Rodeo
HOW DO YOU GET 1995 3.2L BACK ON TIME I PUT IT ON THE MARK AND ROTATE 2 TIME IT DON T STAY ON TIME WHAT DO I DO TO FIX ....HOW DO I KNOW WHEN THE CAMERAS ARE IN THE RIGHT PIACE 3.2 L HELP ME CALL ME ...
timing for our 1998 rodeo isuzu car You didn't say whether you had a V6 engine or a 4cyl. Here is the procedure for a V6. It sounds like he moved the cam shaft independently of the crankshaft or other
879 questions posted
Usually answered in minutes!
832 Questions
814 Questions
819 Questions
720 Questions
547 Questions