1998 Nissan Frontier "truck runs good 30 min" Questions

Car run good 30 min then stall turn on mill Has communicationation before it stall no communication after set over night no codes no light car run good for 30 min Crank shaft sensor.

...runs for 2 to 3 min and then shuts back off. i have replaced crank shaft position sensor, fuel pump, fuel filter,run fuel pressure test held at 30 psi steady. Tested the coils they are good. Can let ...

runs well with n prblem for a good 1/2 then it starts to have less power till it turns off. It will not restart again until a good 45 min to an hour and it runs great again for the first 30 min. A bad

...runs good for 2 min disconeected runs like **** at fifrst runs fine after that. what could it be vacuum line from the map sencser to the carb. if i disconnect it runs like **** for 30 sec. the runs ...

...good for 30 mins. I have a full tank of gas. Stopped for 15 mins to go in store. Came out and car won't start. Engine cranks but it won't start. My solution - had it towed to a garage this AM. We ...

It starts fine runs for approx 10 min and then shuts down,then wont start again for approx hour to an hour and 30 min's it sound like you have a bad distributor, good luck.

...runs for 30 mins cuts off ,restarts in 5 mins ,replace module ,computer.still has same problem I had the same problem I changed the MAP sencer (manafold absolute pressure) may be worth a try, it ...

...to drive it its like it runs out of gas. possibly electronic ignitition module ... 30$ ... this drove me nuts i kept thinking it flooded, then wait 30+ min starts again for less than 3 min . good ...

runs good, after 30 mins stalls no injector pulse and hard to start.after 10-15 mins starts again, spark OK. changed fuel pump,distributor. Same run the fault codes and check for problem ECM There is ...

...good. Car will run 25-30 mins. then shuts down. Won't restart. But the next day will start but repeats the shutdown process after running 25-30 mins. Help!! have the anti theft module checked ...