20 Most Recent 2000 Nissan Frontier Questions & Answers

Tire compressor probably draws too much current for the socket. Are you sure it is a cigarette lighter socket? Some sockets are just to provide accessories 12v. Did a cigarette lighter come with this socket? True cigarette lighter sockets are generally fused at 25 or 30 Amps

2000 Nissan... | Answered on Jan 08, 2018

You need a tune up or a new fuel filter or injectors cleaned

2000 Nissan... | Answered on Oct 24, 2017

You are correct the upper radiator hose leads to the thermstat housing. The thermostat housing should be retained by only 2 bolts.

2000 Nissan... | Answered on Oct 07, 2017

there is cover plate on cross member for back wheels. it is behide it.

2000 Nissan... | Answered on Oct 01, 2017

Try check the glo plugs, if they're working or not.

2000 Nissan... | Answered on Sep 13, 2017

You have not run a engine control module fault code test, this is key to finding the possible causes. Borrow or buy a OBD2 code reader and check the codes

2000 Nissan... | Answered on Sep 11, 2017

Impossible to bypass. YOu must fix the underlying problem

2000 Nissan... | Answered on Jul 27, 2017

Dear Kenny,
Unfortunately, you will need to get to a transmission shop a.s.a.p,
because there is a good possibility you "tranny" is about to "go out".
Be sure to carefully check the transmission fluid level right now.
If you have only 300 to go, perhaps you might rent a car to finish your trip whilst someone fixes the problem.
God bless your efforts.

2000 Nissan... | Answered on Jul 11, 2017

replace the cat converter for a start
pinging ( detonation) is from incorrect air /fuel mixture or ignition timing
run the fault doses to see what sensors are not correct

2000 Nissan... | Answered on Jun 03, 2017

Here's a link to where your Crankshaft position sensor is. GET 25 GIFT CARD FOR EVERY 100 SPENT ON ONLINE SHIP TO HOME ORDERS ,yes,the camshaft sensor is in the distributor.Also check this video out. 2000 Nissan frontier 3 3L V6 no crank no start possible lo

2000 Nissan... | Answered on May 25, 2017

the next thing i would check is locate all of the ground wires under the hood (grounded to the body) Shiny clean with sand paper and replace. while i am at it I would do the same to grounds to the frame.this may solve your problem . If your grounds are not well connected you will spend many UNESSARY dollars in parts and labour.

2000 Nissan... | Answered on Apr 10, 2017

Not finding what you are looking for?

798 questions posted

Ask a Question

Usually answered in minutes!

Top Nissan Experts


Level 3 Expert

84625 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Frontier Nissan

  • Frontier Nissan

Most Popular Question

truck will start run fine while

  • Cars & Trucks