2000 GMC Jimmy "disconnect abs" Questions

disconnect the connector for the abs to the bearing.braking will feel normal and youll just have the abs light on. all 3 problems can be a leak or seal in caliper/cylinder look for leak if no leaks or

...ABS computer. Wiring loom connections need checking. Disconnect, reconnect wiring looms around engine compartment dealing with abs equipment. Spray contact with contact cleaner. My guess is the wheel ...

...the beast...So what's the problem?? We thought maybe a computer wasn't reset or something, so I disconnected the neg. battery cable for a few minutes. The ABS light went out for a minute or two ...

...gmc jimmy 4x4 remove wheel,remove brake hose bracket disconnect abs wire,remove upper balljoint,mark position of eccentric cams to frame brackets before removing bolts,pry control arm out,et

...scroll down to disconnecting the abs sensor, this will show you how to remove and replacing is the opposite. You ...

disconnect ABS on a 2000 Jimmy? Paying $400 a pop on wheel sensor seems a little out there. You must be getting that price from the dealer. A/P stores show them from about $35.00/ea to about $72.00/ea

...drive. As for siezed calipers, those are best told by rusty brake rotors. check the abs sensors for disconnected or damaged connections the sensor connection has to be connected to the clip the clip ...

If I was you I would get the alignment checked along with replacing brake pads and rotors and maybe disconnecting the abs, thats what I did to mine and have no problems anymore

...disconnect the battery to accomplish this as well, but you'll lose your clock and radio stations and it may idle funny for a bit), then plug it back in (after 10 minutes disconnected), this will ...

...ABS is likely on becacse you still have a bad connection from the wheel sensor . You can test this the wire that connects to the sensor is a short pigtail that connects to the main harnest near the ...