2003 Dodge Stratus "crank cam shaft sensor located" Questions

cam and crank shaft sensors located? The only code we got when scanned was cam crank shaft sensor intermittent. No check engine light is on. It starts but dies after 20 mins or so. the crank sensor is

...crank shaft censor located bank 2 there is only one crankshaft sensor so you will be looking for a CAM shaft sensor for it to be on bank 2 go google and type in --location of cam shaft sensors on ...

...cam sensor here is crank sensor info the crank sensor is located in front of engine just behind the crankshaft pulley using ohmmeter check resistance between terminals on sensor replace is not within ...

...cam shaft sensor but need to see about fixing the crank shaft sensor and do not know where its located The crank shaft sensor is located on the front of the engine under the timing cover. In order to ...

...cam position sensor located? and where is the crank shaft position sensor at?And could you send a diagrm or something to show? the cam sensor is located on top of the engine in the front of the left ...

...Crank Shaft is located and the Cam shaft is located so I can replace them if needed? Thank you mcdevito75 here, BEST BET, let the shop do this work, too many un forseen problems could come up. The ...

where is the cam shaft position sensor located on a 2001 gmc 5.7 , and also the crank position sensor? If this is a 5.7L the cam sensor is in the distributer and the crank sensor is in the timing ...

...CAM), (IGN), (CRANK) MAP is your mass air flow which is located at the beginning of your air intake, TPS is the throttle body position sensor, the CAM is the cam shaft position sensor (transmission), ...

crank the engine. If it is not then check the timing belt as the distributor is driven by the cam shaft. If the belt is broken the cam shaft will not turn and you could get this code.The cam sensor is

...the same problem i had..there are 2 sensors one being your cam shaft sensor (normal to go out) and the crank shaft sensor..these work inline with computer to determine correct timing.hope this ...