Question about 2003 Pontiac Montana

1 Answer

Need to know how many sensor. is on my transmission.. 2003 Pontiac Montana v 6 .. can you show me picture where transmission control solenoid goes?

Posted by Edwin Bolin on

Ad

1 Answer

Trevor Goble

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

  • Contributor
  • 30 Answers

There are 12 common sensors and 10 internal sensors. The most common that often fail (MAP), (TPS), (CAM), (IGN), (CRANK) MAP is your mass air flow which is located at the beginning of your air intake, TPS is the throttle body position sensor, the CAM is the cam shaft position sensor (transmission), IGN ignition position sensor and the CRANK sensor is located near the bottom driver side front

Posted on Oct 31, 2013

Ad

3 Related Answers

Anonymous

  • 1 Answer

SOURCE: how to put out the radio in montana 2003

there are 4 screws. two in the front behind the cup holder and two up underneath in the cupholder bay after the cupholder is removed. they are phillips head and 8mm I believe. this is all you need to remove the cover.

Posted on Jan 12, 2009

Ad

Anonymous

  • 55 Answers

SOURCE: replace thermostat 2003 pontiac montana

yes but with the right shaped wrenches and tiny hands it can be done without removing the exhaust crossover pipe

Posted on Oct 16, 2008

daves944

Dave C

  • 1050 Answers

SOURCE: 2003 Pontiac Montana Front Wheel Bearings

Remove the wheel, remove the hub nut, remove the brake caliper and rotor, put your socket and extension through the hub flange onto the bearing retainer bolts, undo them, release the abs sensor connector if it has it, remove the bearing and hub flange as an assembly, put the new one on and go backwards from here. Torque the hub nut to 180 ft/lbs, your done.

Posted on Apr 08, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you replace a transmission pressure control solenoid on a 2006 Pontiac Montana?


transmission 4t65e solenoid location-khpbmhaocwhdo3b0pqdplrqt-5-0.gif You will need to gain access to the side pan to change the solenoid (big job)

Apr 14, 2018 | Pontiac Montana Cars & Trucks

1 Answer

Which solenoid would I need replaced: skips 3rd gear... goes straight from 2nd to 4th (2000 Pontiac Montana)


first you need to know engine and transmission faulty code
next it's a default mode when there is a faulty code this is why you need code
hope it helps

Apr 05, 2014 | 2000 Pontiac Montana

1 Answer

Transmission problems


look in google "image" then type in 2003 montana transmission, should be many to choose from,Gary

Oct 28, 2013 | 2003 Pontiac Montana

2 Answers

2000 Pontiac Montana . Goes into gear hard when it shifts. Has 140000 miles on it.


It sounds like the pressure control solenoid inside the transmission. With that many miles I would suggest going ahead and rebuilding it. You need to remove the transmission from the van anyway to replace the solenoid. I have rebuild several of these, be sure to put in a shift kit, it makes a big difference. I've rebuilt them before and wasn't happy with the way it shifted, so I pull it back out, put in the kit and that did the trick. So, needless to say, I always put the kit in the first time. Although, I do know a guy that changed his filter and added some Lucus oil treatment for the transmission to the new oil, and he says he hasn't had that problem sence........makes me wonder.

Mar 07, 2011 | 2000 Pontiac Montana

1 Answer

PROBLEMS WHITH THE TRANSMISSION CONTROL SOLENIOD


===shift interlock solenoid--Inside the steering column near the ignition switch

===1-2 shift solenoid valve--Inside the automatic transaxle
to remove it :
  1. Remove the case side cover. Refer to Case Side Cover Replacement.
  2. Disconnect the transaxle wiring harness.
  3. Remove the 1-2 shift solenoid (315A).
2-3 shift solenoid valve--Inside the automatic transaxle
to remove it;
  1. Remove the case side cover. Refer to Case Side Cover Replacement.
  2. Disconnect the transaxle wiring harness.
  3. Remove the 2-3 shift solenoid (315B).
==the torque converter solenoid--inside tranny too

good luck,let me know

Jun 04, 2009 | 2000 Pontiac Montana

1 Answer

How to put out the radio in montana 2003


there are 4 screws. two in the front behind the cup holder and two up underneath in the cupholder bay after the cupholder is removed. they are phillips head and 8mm I believe. this is all you need to remove the cover.

Dec 12, 2008 | 2003 Pontiac Montana

Not finding what you are looking for?
2003 Pontiac Montana Logo

361 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Joe Taylor
Joe Taylor

Level 3 Expert

2228 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...