...change all the belts. 2002 frontier 4 cyl: 1) take off air intake tube, 2 screws 13 mm above radiator. 2) 1st belt for power stirring has pulley, undo pulley screw and unscrew adjuster bolt enough to ...
Question about Nissan Maxima
...Ran Like **** Just Chugs And Dont Give Aney Info Or Codes Then Smothes Right Out And Runs Grate Changed Crank Sencer Was Running Yester Day Comp. Was Showing -28 For Eng. Temp.[ When Truck Is ...
Changing V belts on Nissan Frontier 2002 4cyl I'm trying to tighten the V belts on my Nissan Frontier. I have a belt squealing. Is the lockdown nut/bolt for each adjustment located in the center of ...
...change, alternator replaced and some power stering hoses replaced. chugging problems began after this work. I did have a KNOCK SEN/CIRCUIT AND PURG VOLUME CONT/V code as I was leaving the Nissan ...
frontier will not start. About 3 days ago, the battery light would stay on after the engine started...had the battery checked and it was fine...then serviced it yesterday but it still does not start..
Question about Nissan Maxima
alternator isn't charging the battery and will need to be changed. Hope this helps. you should know your motor inside out, if you have never ever had problems with aulternator, it could be the brushes
...change the baterry It also could be the starter, if it just clicks and doesn't turn over it should be that but not a hundred percent sure it could also be the alternator but that would just ...
Question about Nissan Cars & Trucks
...frontier 4x4 2005 and the alternator went bad which was then changed and since then the vehicle is hard starting and slow cranking. When the vehicle starts it drives perfectly. Done wrong. for sure. ...
253 questions posted
Usually answered in minutes!
1,309 Questions
1,122 Questions
1,007 Questions
857 Questions
783 Questions