2000 Ford Excursion "threw connecting rod" Questions

... cant get rear tailgate open i tried opening with the key and remote. is there any way to unlock it threw the inside yes take off the inside panel and move the rods connected to the lock to open,,if ...

threw the front rod need to know how to get it? if ur talking about a connecting rod in engine than u have to pull and tear down engine the rod is connected to the piston and crank need to rebuild or ...

...threw a rod sorry hope it helps ya Not being able to hear it for myself, it sounds as if you have a wrist pin knock. The wrist pin connects the rod to the piston. The remedy is to replace the wrist ...

...connecting rod to door handle fell down in the door and i did not see how it was connected at th How outside doorhandle on the passenger side is installed. Mainly i need to know how the rod connected ...

...rod threw oil pan.if it breaks. Best thing is to stop driveing and get repaired be it gets worse. Your car is probly a high miler and this is what happens after awhile.,,,,,There is no water in oil ...

rod end moves the tire with the steering wheel. The sway bar link helps keep the car stable around corners. And is normally a long bolt with washers and bushings running threw a long bar that connects

...tracks, you most likely threw a connecting rod. Try turning the crankshaft by hand (with the appropriate size socket and bar on the crankshaft nut) if you can't budge it, the engine is probably

...threw a rod in the engine- i cant drive it anywhere because it knocks really bad - what should i do should i try to tow it and repair it or junk it. and how much would it cost to repair it and where ...

...Worse would be if you threw a connecting rod, which would mean the crank would no longer turn over, and costs would rise to $1500 to $2000, because engine would have to be removed and crank

...threw water and it went into the air box and into the motor i changed the oil twice and a new airfilter the oil looks clean now but the there is a tapping sound in the top end. I think its a lifter ...