1999 Ford Expedition "knocking drive train" Questions

Ad

Question about Ford Expedition

2 Answers

...knocking get loud, I removed the front drive shaft an the sound is gone an my mpg has went from 10 mph to 17 mph, their Is a bearing on the trains, that goes bad an hooks up to the drive shaft you ...

Ad

...knocking sound Secondly, does the noise only occur only while you are in motion? If there is no noise when sitting still, idling, then probably something in the drive train, other than the engine is ...

Ad

Knocking Noise - Drive Train? Hello, I would like and share a question about my 2001 Pontiac Grand Prix. There is a knocking like sound coming from the front on the car during the following situations

97 awd moutaineer knocking sound from transfer case and stuck in 4wd knocking sound when rolling in gear if it isnt a shift stick issue or drive train problem repair or replace the transfer case

Question about Ford Expedition

1 Answer

...knocking under acceleration. Maintains power and doesn't miss. Sounds like bottom end or valve train. Your main and rod bearings are worn and need to be replaced. Continuing to drive in this ...

Question about Ford Expedition

1 Answer

...KNOCKING SOUND.THE CAR IS A 1995 BUICK LESABRE.WHAT COULD THIS NOISE BE? If you can tell where the knock is coming from, it helps a great deal. I know it can be hard for a person not really trained, ...

Question about Ford Expedition

1 Answer

...knocking. Make sure the pulley on the compressor spins freely and without hangups as well. Check the tension pulley and make sure it is giving proper tension to the belt as well. A loose belt will ...

Question about Ford Expedition

1 Answer

...drive montero sport 2000 model makes a knocking sound when tou try to move frcefully or fire raise the engine it does not happen untill the engine is warmed up Hi Barikinas, I would suggest you check ...

...phazer has a knock in the drive train sometimes and the drive light blinks when this happens Did you find out what the problem was. I have the same problem with my phazer. any help would be

...setting off does anybody have any ideas A loose drive shaft or differential. It could also be a loose engine mount. I would get a garage to check your drive train for loose fittings, bolts and

Not finding what you are looking for?
1999 Ford Expedition Logo

2,750 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Expedition
2000 Ford Expedition

2,188 Questions

1998 Ford Expedition
1998 Ford Expedition

1,627 Questions

2003 Ford Expedition
2003 Ford Expedition

1,696 Questions

2001 Ford Expedition
2001 Ford Expedition

1,161 Questions

1997 Ford Expedition
1997 Ford Expedition

1,048 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...