1997 Ford Expedition "front brake" Questions

...front brake caliber on a 1997 ford expedition Caliper Removal CAUTION: Do not use heat to loosen a seized lug nut . Heat can damage the wheel and the wheel bearings. Loosen the lug nuts. Remove the ...

front brake makeing grinding noise when i apply the brake to stop i replace my front brake pad and rotors and when i turn my wheel to the left and when apply my brakes i hear a noise like metal ...

Front Drivers wheel was too hot to touch. Drove at 10mph to get home. However, when the truck cooled the brakes were fine. We have replaced the caliper approx 3 months ago. Brake pads are fine. No ABS

...to tighten caliper but relies on gravity/suction return. Rubber brake hoses internally can form flaps which act like 1 way gates. Check other front axle for same parts, maybe 1/2 shaft is

...Brake system or front Hub bearings. You would need to create clearance in the brake pad by resetting the Caliper on its mounts. If unsuccessful, remove the front Calipers (Leave the hoses hooked up) ...

...front brakes , inspected rear brakes. bled all brakes mucho times You need to install a brand new rear drum brake spring kit. Most likely. You have a broken brake shoe return spring it sounds like. ...

...front-brake dragging; broken or sagging springs. Have your front brakes checked. If the vehicle pulls while driving there a couple of things you can check. 1) Inflate tires to manufacturers ...

Brake rotors on a 1999, 2002, and 2004 Ford products and usually in the front. I can give you several suggestions. Replace the front rubber lines. Under pressure fluid will flow to the caliper, but if

...front brake pads This is normally a 7mm hex key! Not usually supplied in a hex key set......any good auto parts store will have one! Not true. This is a 9mm Hex Head. Went to multiple auto parts ...

...front rotors they are warped can not be turned down by lathe. Could be a couple of things. Does it pulse at brake pedal? If so it's warped rotors. If it's doing this on wet or icy roads it might be ...