2004 Ford Expedition "clunking noise drying" Questions

...clunking noise' I have a nissan navara adventura (new shape) the cenral locking is making a clunking noise at the drivers door when locked from the key fob,all four doors lock fine.it on only makes ...

...clunking noise from i have a 1995 toyota land cruiser when going in reverse i hear a clunking noise from the rear axle There are 6 lube points on the drive shafts and u-Joints, check to see these are ...

backing up made clunk noise and when dry sterring it makes a clunk noise when turning wheels left and right 97 for Taurus gl . i backed out of my drive way this morning with a load of kids, only ...

clunking noises When I turn into a parking spot, I hear loud clunking sounds like I am being rearended. When I drive straight, there is a vibration when my foot is on the gas pedal and when I let up ...

...clunking noise and the frequency of the clunking is directly proportional to the speed of the vehicle. does anyone know what i broke that could be causing this? i have parked the car until it is dry ...

...noise. As far as your car clunking, the shift Solenoid is probably got some problems. Adding additive has never really worked for us when we put it in the tranny's I don't really believe in Additives ...

...clunking noise in my steering when I turn the wheel at low speed You need to replace the CV shaft boots. They're cracked and leaking grease that keeps your wheel bearings and CV joints lubed. If ...

95 jeep wrangler clunking noise when clutch engages Did you have a look at the prop shafts universal joints if they are worn or dry? Also check the sliding joint for wear if the prop shaft has them.

...and the joints are dry, the axle is causing the clunking noise. Also,check the transfer case fluid level,low fluid level can cause the noise due to dry or damaged gears. replace the shift ...

clunking noise w/ acceleration Maybe you can help me...when I am decelerating around curve and then start accelerating, I have this clunk in the engine. I was told that the drive shaft needed to be ...