2000 Dodge Ram 1500 Truck "rear end noise" Questions

...rear end of my '97 dodge 1500 truck I hear a rolling/scraping (metal on metal) noise from the rear end of my 1997 dodge truck. Any idea what that could be? I have been told that the rear end is ...

rear end making hum noise as driving rear end makes noise when driving sounds like pinion gear or carrier bearing . Is there any quick fix or another solution for this without spending crazy money ? ...

...rear end, inability to move that is not a good noise. you will need to remove the rear cover on the rear end I think you will find a lot of broken pieces, sounds like you need a ring and pinion gear ...

...rear end whinning noise in rear end A whinning noise while turning is an indication of a worn bearing. The extra pressure put against the bearing/race during the turn and the closing of a gap creates ...

...rear end 2001 2wd 1500 the dealer has repaired it 4 times since new problem never goes away Is the popping and clunking coming from the rear end? If it is, you might try and find a new shop, a well ...

rear end noise when i let off the throttle i get a clunking rear end noise when i let off the throttle Check the U joints, there more common to go bad then the differential, unless you are low on ...

...rear end sounds like power steering noise, when turning left or slowing down reminds you of power steering noise I would check the carrier bearing on the drive shaft. If that is Okay what you have ...

rear end making whining nosie This could be one of several problems: If the noise increases with speed, and you are only hearing it from the rear differential and not the transmission, it could be the

...rear end when I accelerate, it's really loud when I have our camper hooked up to it. It used to just grind once in a while when taking corners but with the trailer I hear the noise from stopped to ...

rear end brakes feel like they're not grabbing right when I am coming to a stop? Rubbing/grinding noise in rear end brakes Feels like a rubbing/grinding and sometimes a thumping noise. I just replaced