2001 Dodge Ram 2500 Truck "remove heater door actuator" Questions

Ad

Question about Dodge Ram 2500

1 Answer

heater core is getting coolant circulating through it then you may have a temp blend door, or blend door actuator not working properly. The blend door is located in the air box under the dash, and the

Ad

Heater Core Hello Payton, unfortunately the newer dodges have a poor hinge design on the air blending door which is operated by an electric actuator. The " Blending" door ( which I call the flap) cold

Ad

heater blows out of defroster and floor vents no where else no matter where switch is set Three things come to mind.    Defective door actuator.    Broken door.    Faulty

heater to hot. Removal & Installation Remove the floor air outlet duct extension (1) from the floor duct (2). Fig. Remove the floor air outlet duct extension (1) from the floor duct (2) Disconnect

...heater still does not work properly, repeat the entire procedure. Air Door Actuators/Motors Removal & Installation Recirculation Actuator To Remove: Remove the right lower instrument panel (I/P) ...

...heater core box, how to remove it is a very long answer. read the FSM on HVAC or login to alldata.com see HVAC chapter, and read. it. anyone can, not just me. i see this on line,. Disconnect and ...

...door is broken stuck.remove the dash console panel [ac heater panel and radio] you can see the door actuator.remove the 3 screws and pullout the actuator using flat screwdriver try to rotate the ...

remove the heater box to do this. Once unjammed, the actuator may work OK. If the door rotates fine by hand, then replace the actuator. The part costs $40 at autozone and looks like the picture below.

Question about Dodge Ram 2500

5 Answers

remove the electronic actuator. The blend door could be the likely problem as others have stated. I just repaired my brothers by removing the lower center panel under the dash. This exposes the heater

Question about Mercury Cars & Trucks

1 Answer

heater core. If both are hot, then the thermostat is working and you've got a blend air door/actuator problem. Actuator failure is pretty common on these. Remove the actuator and open the door by hand

Not finding what you are looking for?
Cars & Trucks Logo

1,162 questions posted

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...