1985 Chevrolet Chevy "valves intake valve" Questions

Ad

...valve on the intake hose that goes thru the firewall. Check to see that the cable is connected and the valve is working. If it is working properly, the hose should become hot on the heater core side ...

Ad

Question about Chevrolet Chevy

1 Answer

valves on #1 should nor be moving. This is #1. If they are moving then you are coming up on #6 and the engine should be rotated one complete turn to reach #1. With the engine on #1 you can adjust #1-3

Ad

...intake and exhaust to properly adjust the valves on this engine, it requires you to run the engine (now be ready to make a mess), and the nut that holds the rocker needs to be loosened until there is ...

...heads from an '99 4.3 to an '88 Can I take the heads and intake off of a 1999 4.3 and install them on a 1988 4.3? Nope,sorry,valve train is all different,studs on one bolts on the ...

Question about Chevrolet Chevy

1 Answer

...restart Need to prime after 2 days of not running The most common cause is a faulty check valve in the fuel pump if your vehicle has fuel injection. If it has a carb it may be leaking into the

Question about Chevrolet Chevy

1 Answer

intake. large fitting at rear goes to brake booster. There should also be another large one for pcv valve.There other ports that supply vacuum to accessories options. Some ports on that carb are above

how do I tell if I have a hyd. or solid lifter cam in my SBC and how do I tell the differance between the two lifters If the engine is not apart, there isn't any real way to tell but if you remove a ...

...intake an exhaust are usually a different setting, check the 'net or a repair manual, good luck ON THE CHEVY 350 IF THE VALVES ARE TO TIGHT AFTER ADJUSTING IT WILL NOT RUN BECAUSE THE VALVES ARE NOT ...

...intake manifold It could be the valves,and they may just need adjusting. You should have 21" of vacuum pressure, check for valve adjustment, also check ignition timing.Also check for a clog exhaust ...

Question about Chevrolet Chevy

1 Answer

...intake valves have to be open and stasrting to close as you turn the crank to align the timing marks (TDC). As you pass TDC the intake valves are closed and the exhaust valves start to open. Back up ...

Not finding what you are looking for?
Cars & Trucks Logo

497 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...