1989 Chevrolet S-10 Blazer "turning lights blows fuse" Questions

I have a 1998 chevy blazer (s-10) 4.3L 4x4 it keeps blowing the #15 (10amp) 4wd fuse, if you put a 10 amp fuse in it will blow the minute you turn it on ,then we put a 15 amp in it seems to do it when

...blows and dome light stays on when vehicle is on and off. for the dome light there is a dial by the lights and turn that up and down can't remember which way but that should turn that off. i think ...

blinkers and brake light wont work the brake light fuse blows everytime I change it n the blinkers don't work but the fuse is fine sounds like there might be a short in the turn signal switch

I have a 96 Chevrolet blazer sport 4wd 2door my interior light fuse keeps blowing why is this. Also my dome light won't turn off Check the shut off switch at door & the one at the headlight switch

...lights lightly flicker, and headlights dim when hitting the brakes. Anyone know where the short is, and/or how to fix it? My cigarette lighter/odb reader fuse blows...is that all it is? Also, heater ...

...lights work, Braking blows the fuse. unplug over head and see short on white wire to brake light. Paul White brake wire to trailer connector was coupled to white Gnd wire at trailer connector

...lights and the alarm for when you open the door went off and stayed on.The car then died. I replaced the altenator and replaced the fuse for the instrument panel and all was well for 10miles and the ...

...lights after you replace it and see if it blows again. If it does then you have a short that needs to be fixed. Usually what happens is that the wire is rubbing somewhere and has chaffed through. ...

...lights and turning signals for example. Then try to figure out how to disconnect part of whats a load on that fuse. Say unplug or remove half the load. If the fuse still blows then you can determine ...

...lights, no radio, no blinkers, doesnt crank, service engine light dimly comes on and then shuts all the way off if a play with wires to fusebox or wires to multifunction switch; then there is nothing ...