...engine rebuilt back stock except for a high flow oil pump and a higher lift cam. I want to adjust valves. My question is do I adjust valves like a stock engine or is it a different procedure since ...
Question about Chevrolet Corvette
...valve on a 1975 Corvette? Turned the adjustment nut to the left and right. The power steering wheel is now at an angle when I drive. Do the two front tires have to off the ground? Do I have to take ...
...valve cover in rear area 1973 chevy small block corvette engine. when engine rives up the tapping gets a little louder, the tapping is light, not a deep knocking sound. The valves are out of ...
...shift from overdrive to third during hard acceleration. Transmission recently rebuilt new throttle valve, TV cable working and adjusted properly. Help? Are you sure the TV ( trans shift cable at the ...
Valve Adjustment 427 Cubic Inch solid lifter for 66 vet Are you needing the procedure or the specs?
engine valve adjustment engine block valves> its got HLA/s what engine? lots of engines used, name one.
1985 corvette. I had the valve guide seals replaced and lifters adjusted, car was running fine before. When completed the left side injectors were not pulsing as well as the right side and the left ...
adjust valves Ok I am sory to brake the news to you but there is no adjustment on a 3.1L the rocker arms are torqued to specification and the lifters are the Hydraulic adjustment. I hope this helps. ...
in you have to adjust it to make it work.if all is good. your throttle valve sticking open.due to gum and carbon build up around valve.or your throttle cable need adjusting.could be out of adjustment.
...cold. The choke can be adjusted on the side by loosening the 3 screws and wathcing the butterfly valve. another thing, you might have to adjust the carb to the specifications on your car for how ...
362 questions posted
Usually answered in minutes!
178 Questions
181 Questions
156 Questions
142 Questions
137 Questions
