1998 Chevrolet Blazer "silverado egr valve" Questions

...Silverado 5.0 I had a tune up last year when I had intake manifold replaced, car has ran great until last week. No codes came up at all, but car runs rough. I replaced the cap and rotor today and did ...

clean it or replace it? The 2006 Silverado doesn't have EGR. They did away with it in '03 I believe. The 2006 silverado does have an EGR valve. I took mine to the shop and that's what is wrong with it

...silverado egr valve. WHERE IS IT looking for location of egr valve on 5.3 chevy engine on 2002 silverado. It is NOT located on right front, passenger side as indicated previously It is on passanger ...

...egr valve is located on a 2000 chevy silverado 1500 5.3 liter engine . The EGR valve is located in front of the oil filler neck. All you need to do is remove the electrical wire from the top of the ...

...egr valve located on a 1999 silverado 5.3 vortec i think the egr valve needs cleaning on my truck i would like to find where its located try cleaning the inside of the MAF sensor with CRC brand MAF ...

egr valve o2 Fighting with a 02 silverado 5.3L 1500 very slight hesitation on take off giving EGR CODE p1406 I cleaned and tested still getting code and hesitation Hi, egr valves don't always clean ...

...egr valve on a 2005 chevy silverado 4.3 litre v6 its not located where i though it was (next to the thermostat i need to know what other locations could it be at Hi Jim, The Exhaust Gas Recycle valve ...

...egr valve to vortec engine located location to egr valve generaly installed beside the evaporation part near the throttle gate. Missing Egr Valve 1999 2006 2007 2013 Chevrolet Silverado GMC Sierra ...

EGR Valve Cleaning on a 1999 4.3 Silverado I took my truck into the shop and they told me the EGR valve needed to be replaced but that it would cost $700 to fix the problem. They stated that not only ...

...egr valve on a 2001 chevy silverado 2500 hd 4x4. I have done all the tests required to determine that the egr valve is fine, however I do not get 10-12v to power it. Does anyone have any info? Check ...