1998 Chevrolet Blazer "replace cylinder head chev" Questions

Ad

Question about Chevrolet Blazer

2 Answers

...Chev Blazer 4.3L 4x4 Engine missfires on light acceleration.I have resealed the intake manifold,replaced the crank sensor,cam sensor,plugs,wires,cap,rotor.Problem slighty improves temporarily after ...

Ad

...spec for chev aveo 2004 cylinder head what torque spec for chev aveo 2004 cylinder head 18 lb ft+60°+60°+60°+10° NEW HEAD BOLTS ARE REQUIRED WHEN REPLACING THE HEAD OR HEAD

Ad

...4 cyl have Chilton manual (worthless manual) go to autozone.com, click on engine, click on cylinder head; there are 11 diagrams and detailed instructions on removing and replacing the cylinder ...

Question about Chevrolet Blazer

2 Answers

cylinder if so the coil pac you just swaped is having a random misfire and needs replaced. hope this helps Hello: There was a GM bulletin that pertained to this problem, It involved the head and valve

Question about Chevrolet Blazer

1 Answer

...replace oil pump & oil sending unit ? Putting in new remaufactured Jasper Engine. Any other parts you suggest ? Plan on keeping truck for several years. Can only help by putting in a new oil pump ...

...still blowing smoke alot out of same tail pipe Prior to that replaced injectors twice Please help thank you Had this happen on a chev 2.8 v6, turned out to be a cracked cylinder had to replace ...

Question about Chevrolet Blazer

1 Answer

...cylinder head, it will conduct heat from the engine and transfer it all through the cable, which will heat up the battery also. That cable should be replaced, and make sure the connection are clean, ...

...Disconnect the engine coolant temperature (ECT) sensor electrical connector. Remove the ECT sensor. Engine Coolant Temperature Sensor In the left side of the front cylinder head, above the ...

Question about Chevrolet Cars & Trucks

1 Answer

head gasket on 2.4 Chev Malibu compression on cylinder 3 is very low and car idles very very rough. Higher rpm's it runs really good. Valves showed no sign of being burnt, ran sea foam through

Question about Cars & Trucks

1 Answer

...to the water tank just burst open. After replacing it, still leaking water and gave code 89 error. Replaced thermostat, still continue leaking and giving error code. Replaced heads and cam belt... ...

Not finding what you are looking for?
Cars & Trucks Logo

1,772 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...