1998 Chevrolet Blazer "getting check gauges light 98" Questions

Ad

Question about Chevrolet Blazer

2 Answers

...light. Then check for leaks . Good luck Adding another pound should have increased the pressure. Are you sure the gauge set valve was not closed. The system should hold approximatly 3.4 lbs. Did you ...

Ad

Question about Chevrolet Blazer

1 Answer

check gauges" light will illuminate. I don't know whether you have had the tank this empty or not, but periodic checking of the cluster should make you notice if the level is this low. Hope this helps

Ad

...check engine light come on and off i got it check and its giving me 2 codes plus my car is runing hot and i put water and coolant on the radiator but the coolant and the water is not running thru ...

Question about Chevrolet Blazer

3 Answers

...getting any juice. I have checked all the wires going to the starter and I even put a new clutch safety switch in it but it still does this. Can anyone tell me what's wrong? try changing your starter ...

...check the transmission heat sensor or the intake air sensor these can be incorporated with temp guage on some vehicles but theres also the problem of alternator is getting ready to give only take an ...

light on or black problem" - Would it be ok if you elaborate a little more? Thanks. As for your fuel gauge - you will be needing a new sender unit. Someone liked to keep the tank full all the time, so

Question about Chevrolet Blazer

1 Answer

...light will change, I step on the gas and it bogs down, I pump on gas pedal a couple of time to get going faster and every thing is fine until I have to stop again Likely a clogged fuel filter or ...

Question about Chevrolet Blazer

1 Answer

...check engine light and none of the gauges work. Two places you need to look. 1-behind the instrument panel there are two plugs that the cluster slides into, you have to remove the knee panel- three ...

gauges stop, speed warning light goes on ,no display,after @5km motor stops ? Where should I start? speed warning is settable using the mode buttons

a toyota lexen is a VT commodore clone

check light stays on for day then goes back to normal any ideas vic legg all scan tools sold scan this engine (unstated size) via the OBD2 port (USA) at knees. all do even $10 scan tools. (ask) or get

Not finding what you are looking for?
Cars & Trucks Logo

1,772 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...