2006 Chevrolet Blazer "oil plug thread" Questions

Ad

Question about Chevrolet Blazer

1 Answer

...oil pan drain plug threads metric Drain plug is stripped. I need to tap and replace plug. What is tap set size? You will have to remove the oil pan & silver braze on a nut inside, the size of the ...

Ad

Question about Chevrolet Blazer

1 Answer

...then it started ticking. I would check the oil level. They may have cross threaded the oil filter,or left the drain plug loose or off. I have even heard of some shops forgetting to put oil in at

Ad

...oil into transfer case for 1998 chev blazer On the back of the case under the vehicle there is a fill plug, remove it, fill the case with the approved fluid to the just below the threads of the fill ...

oil pressure and gas hand not reading either, all new fuses, reverse lights not working, "HELP!!" If you are set on using this engine for its increased power and fuel efficiency, the only way you will

Question about Chevrolet Blazer

1 Answer

...oil pump drive shaft to the drive tab of the distributor. Guide the distributor into the engine. Ensure that the spark plug towers are perpendicular to the centerline of the engine. Once the ...

Question about Chevrolet Blazer

2 Answers

...thread a bolt into the crank and push against that instead of into the hole itselft. Then remove the timing chain cover. I'm not sure if this is a plastic cover or a metal cover, plastic covers are ...

...Oil Drain Plug Threads hole? I'm replacing a new drain plug but the threads in the oil pan hole need to be fix how do i fix the threads? ask the maker of the car what thread the drain plug hole is ...

...oil plug clockwise? If you have already fully seated the plug (all the way in), and it is still turning, you have either cross threaded and have stripped the plug threads or oil pan threads. Take the ...

Question about Chevrolet Blazer

1 Answer

Oil drain plug to open is anti clock wise how too loosen engine oil drain plug I don't think I have seen an oil drain plug that is left hand threaded, it may have been put in wrong and your thread is ...

Question about Chevrolet Blazer

1 Answer

...to be replaced. threads are damaged. A few things cause the threads for the pan plug to fail. Overtightening, smashed threads on the plug itself, and probably the most common, cheaply made oil

Not finding what you are looking for?
2006 Chevrolet Blazer Logo

85 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...