1996 Chevrolet Blazer "crank sensor replacement 1997 chevy" Questions

Ad

replacement but now in the mornings when i try to crank it up it wont crank, its trying to but it just wont turn over and i got to use starter spray to get it going but once its going its good for the

Ad

Question about Chevrolet Blazer

3 Answers

...crank sensor, it is located behind the crank pulley mounted in the engine block on the 4.3 L engine I hope this helps. Yes thats what it sounds like a very weak fuel pump.You need to check the fuel ...

Ad

...sensor. These engines need 60psi to run, 50 psi wont do it. The sending unit in the gas tank,may be your gauge issue. You can check that when you pull the tank to check or replace the pump. The ...

... Simple and a lot cheaper then all the other fixes I tried. Crank sensor was my next option though. i have a 1996 chevy blazer spudder and spits when driving around in overdrive at low rpms whats ...

crank sensor at this time if its never been changed. Also You may have a hair line crack in a fuse that feeds a vital component like fuel pump or computer. Also the Ignition module could do this. If I

Question about Chevrolet Blazer

3 Answers

...Sensor Data Incorrect but Valid DTC B3031 Security System Controller in Learn Mode DTC B3033 Security System Indicates Tamper Or you can try this 30 Minute Procedure Ensure that the battery is fully ...

97 blazer won't start. when cranking over an arc from spark plug wire to trans filler tube occurs. Not continuous, but timed as it turns over. That is a possibility, but not the cause of it not ...

...crank sensor and the cam sensor but don't get power to my fuel pump and the fuel injector (so what could be wrong) Change fuel pump relay.And check the fuses 97 chevy venture = that didnt work - ...

Question about Chevrolet Blazer

2 Answers

...several things. the problem is the crank shaft position sensor ! I just replaced it on my wifes and it runs like new.... Did you try boosting the battery? If not the battery its probally the

...the cam position sensor,thats when the misfiring happen. whats the problem most CPS switches need to be an exact distance from crank. try moving it a little & try running it again. good

Not finding what you are looking for?
1996 Chevrolet Blazer Logo

2,287 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...