Question about Chevrolet Blazer
...Chevy Blazer with Vortec V6 Remove and re install the CPI unit and gaskets on a 1998 Chevy Blazer with Vortec V6 engine? You have to reove the upper plenum. that is the part on top of the intake that ...
Question about Chevrolet Blazer
Chevy Blazer V6 4.3L Vortec Engine, so we bought a new one. A couple days later (before replacing the fuel pump) it started up and ran but ran crappy. So we did V6 4.3L Vortec Engine- 4 door Automatic
...setting of timing sprockets & balancers sprocket of chevy S10 Blazer 1994 V6 vortec 4300 engine try this link, http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152800bfba5 Hope this ...
do you have to lift motor to remove oil pan on a 1999 chevy blazer 2wd with the vortec V6 or can you manuever it out by rotating the crankshaft? yes engine needs t be lifted to clear oil pick up tube
I need a firing order diagram for a 1999 Chevy S10 Blazer 4wd 4.3 liter v6 vortec engine. 1-6-5-4-3-2 Thanks for using FixYa. Kelly
need to find the ignition module on my 1995 chevy s10 4.3 litre vortec v6 its under the distributer cap and rotor. its a small black box with wires plugged into either side
set timing on 2002 chevy blazer 4.3 v6 vortec Timing is not adjustable.
...chevy blazer v6 vortec They are marked on the intake manifold. They are raised numbers at each intake port. If its a V6 or V8 its the drivers side, furthest to the front of the engine. Hope that ...
timing for 2002 4.3 vortec chevy blazer Try this video and see if it helps: Chevy 4 3 V6 How to Set Distributor timing
...Chevy blazer with the vortec V6 4.3 is hesitating when idle and stalls sometimes at stop sign or red lights. Have replaced the throttle pos sensor and the Egr valve and sensor. Any suggestions ? Is ...
2,287 questions posted
Usually answered in minutes!
2,307 Questions
1,793 Questions
1,647 Questions
1,503 Questions
982 Questions