1993 Chevrolet S-10 Blazer "replace hose" Questions

...thermostat housing, and gently pry up the housing, once freed, the thermostat is right there, just remove and replace with a rubber gasket, and replace the housing and hose, you should be good to

...replace the evap hose and dont know how i need to replace the evap hose on a 2002 chevy blazer and dont know how many pieces the hose consists of. how can i diagnose where the hose is cracked. This ...

Core to find out where the leak is coming from. It could be as simple as tightening a hose, or hose replacement, or replacing the Heater Core itself. Let me know if this helped

...if they are ok then replace thermostat by following the hose that comes from the top of the radiator to the motor, where this hose connects is a housing behind this housing is the ...

...hose a few times. Blazer seems to be leaking oil again. What are these oil hoses? Why do they leak. Mechanic said you can't tighten them you have to replace, because of the way they are made. Cost me ...

thermostat replacement where is thermostat housing located? if you follow the upper radiator hose back to the engine the nipple that the hose attaches to covers the thermostat, pull the hose off and u

...hood. if one hose is hot and the other is cold, the heater core is restricted and will need to be replaced. you can trying back flushing the heater hose wth a garden hose. sometimes this

Hose from the Caliper and attemp to reseat again. If it does reseat this time, you will need th replace the Hoses. These hoses fray on the inside because of the pressures exerted on and off. When they

...hose that connects to the vacuum switch on top of the transfer-case on the driver's side. When the vacuum switch is activated, it actives the 4WD actuator under the battery to lock up the front axle ...

replace thermostat hose going into need to replace thermostat hose going into engine . there is a pin hole near the bracket. could this be fixed with a putty compound for metals and aluminum and could