1984 Chevrolet Chevy "4x4" Questions

4x4 ? not working how do you know 4x4 not working ? when we try to switch to 4x4 the lights are blinking when try to turn to 4 hi and it dosen't kick in ? what could be the problem ? we checked fuses ...

1985 chev S-10 4x4 6 cylinder pickup having starting problems i have a 1985 chev S-10 4x4 p.up 6 cylinder, put new starter in, still not starting any suggestions 4x4 S-10 pickup Check your electonic ...

1998 S10 WILL NOT GET OUT OF 4HI i NEVER HAD PROBLEM WITH MY 4X4 I WENT OFF ROAD TODAY AND PUT 4X4 ON IN 4HI. WHEN I WAS DONE 4X4ING I TRYED TO PUT BACK INTO 2WD AND IT WIONT GO IN TO 2WD. I HAVE ...

...for normal operation. No GO to E8. E8 CHECK THE PVH SOLENOID FOR PROPER VACUUM OUTPUT LEVEL - 4X4 ENGAGED Measure the vacuum while switching the 4X4 mode switch to 4X4 HIGH.   Does the ...

I have a 1986 Chevy S10 4X4, Auto.Transmission, Reverse & 1st gear are fine, but will not come outta 1st gear. What can I do? Thanks for any help! To take off and put back the transmission cost ...

...1500 jack up the the side with the broken ball joint under the control arm. Remove the axle nut (4x4) remove the caliper and the rotor. remove the outer tie rod from the knuckle. Remove the upper ...

How do you change shocks on front of 2005 Chevy 4x4, do you have to compress the coil spring? Wanting to know if changing the shocks on the front of a 2005 Chevy 1500 ext cab 4x4 do I need a spring ...

how do you know if 4x4 working ? how do you know 4x4 not working ? Take it in the mud and see if it gets stuck. Does it have locking hubs on the wheels? Turn those, and take 'er through a really buug ...

1985 Chevy: I have a 1985 2.8L chevy 4x4 Blazer I just re... I have a 1985 2.8L chevy 4x4 blazer i just replaced plugs plug wires rotar and distributor cap. it runs good at fast idle - but runs rough ...

1984 1/2 ton 4x4 chevy 6.2d need wireing diagram for starter get a new starter