1990 Buick LeSabre "hazard switch replacement cost" Questions

Ad

Question about Buick LeSabre

1 Answer

hazard lights. Just had the signal switched replaced as well as the fuse, and still no signals. When the signal switch is activated, and you have the brakes on, it does cut off the brake lights in the

Ad

...your problem. The airbag has two horn switches in it. I had to remove the airbag, this is a very hazardous job. Alll the yellow connectors have to be removed, there is one on the steering colum. ...

Ad

...cost you a few bucks and is located under your dash on the driver side. Near your OBDII plug. If your cruise control dosen't work as well, I would believe strongly that it is your multi-function ...

Question about Buick LeSabre

1 Answer

working push the hazard switch until they blink then the turn signals start working again. its a faulty turn signal/hazard switch that needs to be replace costs about 30 bucks pretty simple to replace

...hazard switch. Remove the trim by prying from the sides (Either side of the Cup holder drawer and Card drawer). Pry the hazard switch assembly out from the dashboard. The relay is part of the hazard ...

Question about Buick LeSabre

2 Answers

hazard switch replacement how do i get to the switch to replace it www.rockautpparts.com part number 1S8422 Hazard Warning Switch. $33.96 total cost. My 2002 Alero had switch in dash, not part of ...

...Hazard and turn signals usually use separate flashers, switch the flashers to see if turn signals work and hazards don't, if so replace the flasher you need to replace the blinker flasher ...

...hazard switch. GM sent letters to owners starting December 30, 2004. In January 2006, GM will update the special policy to include MY 2002 Alero, Grand Am and Malibu vehicles not covered under recall ...

...Switch The hazard flasher switch is integrated into the turn signal/high - low beam lamp switch. It protrudes through the upper steering column shroud. When the hazard flasher switch is switched on, ...

...do not have turn signals, hazard flashers or brake lights. A mechanic would check for voltage at the multi-function switch in the column.  Those three circuits go thru the turn signal

Not finding what you are looking for?
1990 Buick LeSabre Logo

531 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Buick LeSabre
2000 Buick LeSabre

1,731 Questions

1997 Buick LeSabre
1997 Buick LeSabre

1,603 Questions

1995 Buick LeSabre
1995 Buick LeSabre

1,084 Questions

1994 Buick LeSabre
1994 Buick LeSabre

904 Questions

1998 Buick LeSabre
1998 Buick LeSabre

897 Questions

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...