...guage wont go back to cold after engine shut off. i have already replaced the thermostat. change the temp sensor / this is eather a coolent temp or engine temp changing the right one will ...
...let it sit for approx 5 mins and it starts up again and runs for a while then stops again. changes the fuel pump, found rubbish in the gas tank, removed it and it still has the same problem. ...
where do i put the jack to change the tire On a mazda 2300 1996 where do i put the jack to change the tire? there should be a rail on your pickup underneath the sill of the doors, on this rail there ...
...with two hands, a flashlight and a Chilton's manuel. Q: How do I get my check engine light off? I changed both parts on both codes from three different AutoZones. The EGR valve and EGR value sensor ...
need to change tire cant remove spare cuz its locked and cant getit unlocked help IF YOU GET UNDER THE REAR AND REMOVE THE PLASTIC GUIDE CONE FOR THE TIRE WINCH YOU CAN THE PRY OUT THE LOCKING BUTTON ...
I need to change fuel pump on a 1994 mazda pickup where is it located. In the fuel tank
i have a 98 b2500 mazda pickup just had all 8 plugs and wires,oil change air filter and thermostat changed because it was running very ruff and wanted to stall out --had catolic conveter changed ...
Question about Mazda B-Series Truck
I have a Mazda Bongo Brawny Van 2007 model, I have just changed the oil, it was pulling nicely but it has just started not pulling, I do not what to do, please help. drain ? what is the meaning ...
...replace the shocks, or if you feel the truck swaying to much when you round a hgh speed corner, change the shocks. If the steering wheel is not doing a good roll when you turn at lower speeds, ...
truck hesitates at 40mph and it feels like it is bogging down try changing the fuel filter
203 questions posted
Usually answered in minutes!
80 Questions
79 Questions
36 Questions
32 Questions
22 Questions