20 Most Recent 1997 Mazda Pickup Questions & Answers

0helpful
1answer

Maxda B4000 RPM skips 2000 to 5000

If you can actually hear the engine race up to 5000 RPM you may have a serious problem. But more then likely you cant actually hear the engine rev up. If this is the case I would suspect a bad Tachometer ground wire.
8/23/2012 3:09:50 AM • 1997 Mazda... • Answered on Aug 23, 2012
0helpful
1answer

My 1997 b2300 skips and jerks going doen road and check engine light comed on

I need to know what the codes are that are stored in the Computer . Auto Zone parts stores will pull the codes for free , have that done and come back to Fix-Ya and tell me what they are so we can pin point what cylinder is miss-firing
8/6/2012 3:41:16 PM • 1997 Mazda... • Answered on Aug 06, 2012
0answers
0helpful
1answer

My dash lights and rear tail lights went out the

Hi, it's either the headlight switch or the tail lamp fuse. Check the fuse first. Sometimes using the wrong bulb will cause the fuse to burn out. It can also be a bad socket that burns the fuse.
9/3/2011 1:55:27 PM • 1997 Mazda... • Answered on Sep 03, 2011
0helpful
1answer

Replacing the fuel filter on '97 mazda pu b2300?

It's basically under the driver seat if looking under the truck. Should be a shiny silver/chrome filter if it is the original.
6/5/2011 4:48:15 PM • 1997 Mazda... • Answered on Jun 05, 2011
0helpful
1answer

I am looking for a diagram of the fuse box panel

Look inside the fuse box cover, the fuse's layout and designations are usually printed there.
3/9/2011 5:49:08 PM • 1997 Mazda... • Answered on Mar 09, 2011
0helpful
1answer

I am trying to fix a 1997 mazda but I need to

What is a spirit gas system.
2/21/2011 3:57:25 AM • 1997 Mazda... • Answered on Feb 21, 2011
0helpful
1answer

Front hub will not lock in on 4wd - all else works

im not familiar with truck but her are some ideas, when you say hub are you saying only one? does this truck have manual or auto hubs? If so, some times the hub grease gets to cold and will not allow the hub gears to slide or engage. Its possible that the drivetrain or 4x4 works but hub is stripped gear, use axle grease on bearings but use lithium grease on gear.
1/11/2011 6:52:28 AM • 1997 Mazda... • Answered on Jan 11, 2011
0helpful
2answers

What fuse controls cig lighter

go to the Library and look for the Hayes Manual for your truck.
1/6/2011 6:09:10 PM • 1997 Mazda... • Answered on Jan 06, 2011
0helpful
1answer

Where is the fuel cut-off

Check the behind the kick panial on the passengers side, I think it is there but not 100 percent sure
11/29/2010 5:44:46 PM • 1997 Mazda... • Answered on Nov 29, 2010
0helpful
2answers

The truck dosent start with new baterry . just

If you just installed the battery then it may need to be charged. Use a trickle charger and leave it on till it is done.
11/20/2010 1:30:22 AM • 1997 Mazda... • Answered on Nov 20, 2010
Not finding what you are looking for?
1997 Mazda Pickup Logo

53 questions posted

Ask a Question

Usually answered in minutes!

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

B-Series Truck Mazda

  • B-Series Truck Mazda

Most Popular Question

front hub will not lock in 4wd all else

  • Cars & Trucks
Loading...